Original: $10,700.00
-65%$10,700.00
$3,745.00The Story
3 Point Hitch Stump Grinder
The Baumalight 3P40 Stump Grinder is perfect for removing large stumps. It connects easily to your tractor and uses a PTO shaft for fast, efficient grinding. With a strong gearbox, it can handle the toughest stumps, making it great for both big farms and smaller landscaping projects.
This PTO-driven grinder works with tractors that have 60–120 horsepower. It’s built to grind large tree stumps quickly, using a 34" rotor with 54 carbide teeth that can cut through a 24" stump in just a few minutes. The powerful gearbox creates 803 ft-lbs of torque, giving you plenty of power to grind stumps quickly.
The Stump Blaster can grind stumps both above and below the ground—25" above ground and 14" below. It works best with 120HP tractors, taking around 2 minutes to grind a 30" stump. For smaller tractors, it still works well, but it may take a bit longer.
If you're looking to clear land or remove old stumps, this is the best tool for the job!
| Stump Grinder |
|
|
|
|
|
| Recommended HP Size | 20-45 | 20-45 | 25-55 | 45-80 | 60-120 |
| Maximum Engine HP | 45 | 50 | 58 | 85 | 125 |
| Maximum PTO HP | 35 | 40 | 50 | 75 | 115 |
| Transmission | Hydrostatic only | Hydrostatic only | Any | Any | Any |
| Hydraulic GPM | -- | -- | 5–20 | 5–20 | 5–20 |
| Rotor Size | 16" | 24" | 24" | 34" | 34" |
| Number of Teeth | 12 | 34 | 34 | 52 | 52 |
| Tooth Part number | H3000 | S1000 | S1000 | S1000 | S1000 |
| Tooth Construction | High speed round tooth | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in |
| Cutting Wheel Speed | 540 RPM | 540 RPM | 810 RPM | 810 RPM | 1000 RPM |
| Cutting Height - Above Ground | 10" | 10" | 18" | 25" | 25" |
| Cutting Depth - Below Ground | 5" | 6" | 8" | 14" | 14" |
| Maximum Cutting Depth - Per Pass | 2" | 5" | 6" | 9" | 9" |
| Maximum Horizontal Cut | 18" | 22" | 22" | 32" | 32" |
| Swing Arc | 0° | 0° | 65° | 65° | 65° |
| Hub Torque | 664 Ft.-Lbs. | 885 Ft.-Lbs. | 885 Ft.-Lbs. | 1475 Ft.-Lbs. | 1327 Ft.-Lbs. |
| Over Torque Protection | Slip clutch | Slip clutch | Slip clutch | Slip clutch | Slip clutch |
| Hitch | Cat I | Cat I | Cat I or II | Cat II | Cat II |
| Quick hitch compatibility | Yes | Yes | No | No | No |
|
|
0 | 0 | 1 or 2 | 1 or 2 | 1 or 2 |
| Requires 12 Volt DC | No | No | No | No | No |
| Input Speed | 540 | 540 | 540 | 540 | 1000 |
| Unit Weight (Shipping) Lbs. | 360 | 450 | 920 | 1231 | 1280 |
| Width (Shipping) | 36" | 36" | 42" | 48" | 48" |
| Length (Shipping) | 30" | 30" | 49" | 54" | 54" |
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
3 Point Hitch Stump Grinder
The Baumalight 3P40 Stump Grinder is perfect for removing large stumps. It connects easily to your tractor and uses a PTO shaft for fast, efficient grinding. With a strong gearbox, it can handle the toughest stumps, making it great for both big farms and smaller landscaping projects.
This PTO-driven grinder works with tractors that have 60–120 horsepower. It’s built to grind large tree stumps quickly, using a 34" rotor with 54 carbide teeth that can cut through a 24" stump in just a few minutes. The powerful gearbox creates 803 ft-lbs of torque, giving you plenty of power to grind stumps quickly.
The Stump Blaster can grind stumps both above and below the ground—25" above ground and 14" below. It works best with 120HP tractors, taking around 2 minutes to grind a 30" stump. For smaller tractors, it still works well, but it may take a bit longer.
If you're looking to clear land or remove old stumps, this is the best tool for the job!
| Stump Grinder |
|
|
|
|
|
| Recommended HP Size | 20-45 | 20-45 | 25-55 | 45-80 | 60-120 |
| Maximum Engine HP | 45 | 50 | 58 | 85 | 125 |
| Maximum PTO HP | 35 | 40 | 50 | 75 | 115 |
| Transmission | Hydrostatic only | Hydrostatic only | Any | Any | Any |
| Hydraulic GPM | -- | -- | 5–20 | 5–20 | 5–20 |
| Rotor Size | 16" | 24" | 24" | 34" | 34" |
| Number of Teeth | 12 | 34 | 34 | 52 | 52 |
| Tooth Part number | H3000 | S1000 | S1000 | S1000 | S1000 |
| Tooth Construction | High speed round tooth | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in | Carbide steel bolt-in |
| Cutting Wheel Speed | 540 RPM | 540 RPM | 810 RPM | 810 RPM | 1000 RPM |
| Cutting Height - Above Ground | 10" | 10" | 18" | 25" | 25" |
| Cutting Depth - Below Ground | 5" | 6" | 8" | 14" | 14" |
| Maximum Cutting Depth - Per Pass | 2" | 5" | 6" | 9" | 9" |
| Maximum Horizontal Cut | 18" | 22" | 22" | 32" | 32" |
| Swing Arc | 0° | 0° | 65° | 65° | 65° |
| Hub Torque | 664 Ft.-Lbs. | 885 Ft.-Lbs. | 885 Ft.-Lbs. | 1475 Ft.-Lbs. | 1327 Ft.-Lbs. |
| Over Torque Protection | Slip clutch | Slip clutch | Slip clutch | Slip clutch | Slip clutch |
| Hitch | Cat I | Cat I | Cat I or II | Cat II | Cat II |
| Quick hitch compatibility | Yes | Yes | No | No | No |
|
|
0 | 0 | 1 or 2 | 1 or 2 | 1 or 2 |
| Requires 12 Volt DC | No | No | No | No | No |
| Input Speed | 540 | 540 | 540 | 540 | 1000 |
| Unit Weight (Shipping) Lbs. | 360 | 450 | 920 | 1231 | 1280 |
| Width (Shipping) | 36" | 36" | 42" | 48" | 48" |
| Length (Shipping) | 30" | 30" | 49" | 54" | 54" |
